Configuring an ExpressRoute connection

Creating the ExpressRoute VPN gateway

To create an ExpressRoute VPN gateway:

1. Go to Admin.
2. From the Tenants panel on the left side, select the tenant for which you want to create an ExpressRoute VPN gateway.
3. Select the Gateway tile, then select Create gateway. The Create gateway panel opens.
4. Provide values for the following fields:

   Option	Description
   Gateway type *	Choose the method for establishing a secure and private connection to your cloud network. You have two options: VPN —Select this option to create an encrypted connection over the public internet. ExpressRoute —Select this option to establish an Azure network connection that bypasses the public internet entirely.
   Name *	Provide a name for your gateway.
   Address space for gateway vnet *	Specify a unique private IP range for the cloud gateway network. This range must be different from your current on-premises network and any future IP ranges you plan to use for cloud robots.

   5. If your automations rely on internal DNS names, you need to specify the IP addresses of your on-premises DNS servers. Select Add DNS Address (Optional), then provide the IP address of your on-premises DNS servers.

      You can enter multiple DNS server IPs for redundancy, but each must resolve all DNS names your automations use. These servers are not used sequentially. If a server fails to resolve a necessary name, the automation fails.

   6. Select Create. The setup may take up to one hour.

   Creating the ExpressRoute connection to the on-premises device

   With the ExpressRoute gateway deployed, you can now connect your on-premises networks to it. Creating this connection differs from a standard setup because you are configuring how to use your pre-existing ExpressRoute circuit**—**the dedicated, private connection you have already established with Microsoft Azure. This process involves integrating your UiPath Gateway, or another Microsoft Azure resource, into that existing ExpressRoute infrastructure.

   The gateway card displays the public IP address, which is an essential information for the tunnel connection.

   1. To start the connection creation, select Add connection.

   2. Provide values for the following fields:

      Figure 1. ExpressRoute circuit in Azure

      

      Option	Description
      Connection name *	Provide a name for your connection.
      Authorization key *	To connect to the circuit, first generate an authorization key within your ExpressRoute circuit object in the Azure portal. Then, write that key in this field. To authorize the connection: Go to your ExpressRoute circuit in the Azure portal. Create an authorization key. Paste the generated key into this field.
      Resource ID *	Locate the Resource ID of your ExpressRoute circuit within the Azure portal. Copy and paste this ID into the field below.

   3. Select Add connection. Once the configuration is complete, it may take some time for the connection status to update to Connected.

      On the Connections list, the Address Space and Public IP Address fields are empty and do not apply to the ExpressRoute connection. Unlike VPNs, ExpressRoute uses Border Gateway Protocol (BGP) for routing by default.