Managing VPN Settings

You can edit the VPN setup for a Cloud Robot - Serverless template at any time, or disconnect the template from VPN.

Disconnecting a Template From VPN

1. Go to Tenant > Machines.
2. At the right of the serverless machine template row, click More Actions and select Edit Machine.

   The Edit Machine page opens on the Machine step.

3. Along the top, on the right, click the VPN Setup step.
4. Click Enable VPN integration to switch off the toggle.
   Important: If a machine needed to access resources inside your company network to execute a job, that job will fail.
5. Click Update in the bottom right to apply your changes.

Changing the Address Space

To change the address space used for a template, you must first disconnect the template from VPN, and then edit it to change the address space.

1. Go to Tenant > Machines.
2. At the right of the serverless machine template row, click More Actions and select Edit Machine.

   The Edit Machine page opens on the Machine step.

3. Along the top, on the right, click the VPN Setup step.
4. Switch off the Enable VPN integration toggle.
5. Click Update in the bottom right.

   Allow a few minutes to disconnect from VPN.

6. At the right of the serverless machine template row, click More Actions and select Edit Machine.
7. Along the top, on the right, click the VPN Setup step.

   If Disconnecting is displayed under the Address space field, remain on this page, but allow a few more minutes to finish disconnecting from VPN.

8. Switch on the Enable VPN Integration toggle.
9. Edit the Address space field as needed.
10. Click Update in the bottom right to apply your changes.

After you apply the change, serverless robots for this template attempt to reconnect to VPN according to the new settings.