Step 3: Configuring your network components

For web service connection

To ensure the integration between UiPath and SAP works as expected, you must establish proper network communication between the two systems:

• The integration uses the same communication channel and call structure in both directions, so there is no distinction between inbound and outbound traffic.

• Communication from UiPath to the SAP system occurs over HTTPS, so the corresponding HTTPS port (typically 443) must be open.

• The SAP system must have a valid, publicly trusted SSL certificate installed to support secure communication.

• You must allow the following outbound IP ranges used by UiPath in your network configuration to enable communication with Test Manager.

Outbound IP ranges for web service connection

Allow the following static outbound IP ranges to enable the communication between UiPath Test Manager and your SAP system, via a web service connection.

Allow these outbound IP ranges through your firewall:

Regions	Outbound IP ranges
Australia	20.213.69.140/30 20.92.42.116/30
Canada	20.220.159.8/30 20.104.134.160/30
Community	20.166.153.132/30 20.23.210.168/30
European Union	20.166.153.132/30 20.23.210.168/30
European Union (delayed)	20.166.153.132/30 20.23.210.168/30
India	20.219.182.96/30 52.140.57.140/30
Japan	20.78.114.120/30 104.215.9.124/30
Singapore	20.198.150.140/30 52.140.57.140/30
United Kingdom	20.90.169.148/30 51.142.146.56/30
United States	20.232.224.12/30 20.66.65.144/30
United States (delayed)	20.232.224.12/30 20.66.65.144/30

For RFC connection

For RFC connections between UiPath and your SAP system, you must allow the following IP addresses in your network configuration.

Note: The integration uses standard SAP communication ports: 33xx and 32xx, where xx is your SAP instance number.

Outbound IP ranges for RFC connection

Allow the following outbound IP ranges to establish communication between UiPath Test Manager and your SAP system via an RFC connection. The following table shows the available outbound IP ranges for each region.

The current outbound IP ranges will be deprecated on January 26, 2026. To avoid disruption, make sure to add the outbound IP ranges listed under the Upcoming outbound IP ranges column before this date.

Important: If the upcoming outbound IP ranges are not allowed by January 26, 2026, you will be unable to use this functionality. Attempts to use this functionality may result in errors.

Region	Current outbound IP ranges	Upcoming outbound IP ranges
Australia	20.167.34.255/32 20.11.199.185/32	13.75.193.84/30 13.75.193.112/30 13.77.46.56/30 13.77.40.228/30
Canada	20.200.104.214/32 20.220.98.56/32	20.151.112.252/30 20.151.113.120/30 40.86.219.188/30 40.86.224.148/30
Europe (European Union)	20.93.15.208/32 20.13.60.212/32	94.245.89.4/30 94.245.93.8/30 20.67.88.64/30 20.67.88.112/30
India	4.224.9.5/32 13.71.90.136/32	40.80.89.64/30 40.80.89.136/30 104.211.218.152/30 104.211.222.120/30
GXP United States	52.143.81.192/32 20.246.192.220/32	13.66.166.60/30 13.66.160.164/30 104.211.56.184/30 40.114.71.160/30
Japan	20.89.117.202/32 104.46.238.159/32	20.89.104.152/30 20.89.104.200/30 40.74.64.240/30 40.74.65.80/30
Singapore	20.44.206.197/32	104.215.184.68/30 104.215.185.96/30
United Kingdom	172.165.145.81/32 51.141.6.153/32	51.104.16.124/30 51.104.16.168/30 51.140.205.20/30 51.140.205.248/30
United States	20.72.203.238/32 20.121.170.55/32	13.66.167.4/30 13.66.163.204/30 104.211.63.160/30 104.211.58.236/30