Automation Suite
2023.10
False
- 概述
- 要求
- 安装
- 先决条件检查
- 下载安装包
- uipathctl cluster
- uipathctl 集群维护
- uipathctl cluster maintenance disable
- uipathctl cluster maintenance enable
- uipathctl cluster maintenance is-enabled
- uipathctl cluster migration
- uipathctl cluster migration export
- uipathctl cluster migration import
- uipathctl cluster migration run
- uipathctl 集群升级
- uipathctl 配置
- uipathctl config add-host-admin
- uipathctl config additional-ca-certificates
- uipathctl config additional-ca-certificates get
- uipathctl config additional-ca-certificates update
- uipathctl 配置警示
- uipathctl configalerts add-email
- uipathctl config alerts remove-email
- uipathctl config alerts update-email
- uipathctl config argocd
- uipathctl config argocd ca-certificates
- uipathctl config argocd ca-certificates get
- uipathctl config argocd ca-certificates update
- uipathctl config argocd generate-dex-config
- uipathctl config argocd generate-rbac
- uipathctl config argocd registry
- uipathctl config argocd registry get
- uipathctl config argocd registry update
- uipathctl config enable-basic-auth
- uipathctl config Orchestrator
- uipathctl config Orchestrator get-config
- uipathctl config orchestrator update-config
- uipathctl config saml-certificates get
- uipathctl config saml-certificates rotate
- uipathctl config saml-certificates update
- uipathctl config tls-certificates
- uipathctl config tls-certificates get
- uipathctl config tls-certificates update
- uipathctl config token-signing-certificates
- uipathctl config token-signing-certificates get
- uipathctl config token-signing-certificates rotate
- uipathctl config token-signing-certificates update
- uipathctl 运行状况
- uipathctl 运行状况捆绑包
- uipathctl 运行状况检查
- uipathctl health diagnose
- uipathctl health test
- uipathctl 清单
- uipathctl manifest apply
- uipathctl manifest diff
- uipathctl manifest get
- uipathctl manifest get-revision
- uipathctl manifest list-applications
- uipathctl manifest list-revisions
- uipathctl manifest render
- uipathctl 先决条件
- uipathctl prereq create
- uipathctl prereq run
- uipathctl 资源
- uipathctl 资源报告
- uipathctl 快照
- uipathctl 快照备份
- uipathctl snapshot backup create
- uipathctl snapshot backup disable
- uipathctl snapshot backup enable
- uipathctl snapshot delete
- uipathctl snapshot list
- uipathctl snapshot restore
- uipathctl snapshot restore create
- uipathctl snapshot restore delete
- uipathctl snapshot restore history
- uipathctl snapshot restore logs
- uipathctl 版本
- 安装后
- 迁移和升级
- 监控和警示
- 集群管理
- 特定于产品的配置
- 故障排除
EKS/AKS 上的 Automation Suite 安装指南
上次更新日期 2024年5月20日
代理
要在 EKS/AKS 上采用代理配置来部署 Automation Suite,您必须配置集群并将 UiPath™ 所需的所有域添加到网络代理的允许列表中。
重要提示:Automation Suite 不支持 IPv6 互联网协议。
有关如何以代理模式配置集群工作器节点的说明,请参阅 Microsoft 和 AWS 的相应文档:
在代理模式下配置集群节点时,请确保将以下域添加到
no_proxy
列表中:
-
EKS
"$VPC_CIDR,$SERVICE_CIDR, localhost,127.0.0.1,169.254.169.254,<clusterfqdn>,.<clusterfqdn>,.internal,.eks.amazonaws.com,.cloudfront.net,.s3.CLOUD_REGION.amazonaws.com,.dkr.ecr.CLOUD_REGION.amazonaws.com,ec2.CLOUD_REGION.amazonaws.com,api.ecr.CLOUD_REGION.amazonaws.com,.elb.amazonaws.com,.gr7.CLOUD_REGION.eks.amazonaws.com,.s3.amazonaws.com,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,.svc,.svc.cluster,.svc.cluster.local,.svc.cluster.local.,argocd-repo-server,istiod.istio-system.svc,logging-operator-logging-fluentd.logging.svc.cluster.local,argocd-repo-server,.local,.cluster,ai-helper-svc,ai-pkgmanager-svc,ai-deployer-svc,ai-appmanager-svc,ai-trainer-svc,get"
"$VPC_CIDR,$SERVICE_CIDR, localhost,127.0.0.1,169.254.169.254,<clusterfqdn>,.<clusterfqdn>,.internal,.eks.amazonaws.com,.cloudfront.net,.s3.CLOUD_REGION.amazonaws.com,.dkr.ecr.CLOUD_REGION.amazonaws.com,ec2.CLOUD_REGION.amazonaws.com,api.ecr.CLOUD_REGION.amazonaws.com,.elb.amazonaws.com,.gr7.CLOUD_REGION.eks.amazonaws.com,.s3.amazonaws.com,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,.svc,.svc.cluster,.svc.cluster.local,.svc.cluster.local.,argocd-repo-server,istiod.istio-system.svc,logging-operator-logging-fluentd.logging.svc.cluster.local,argocd-repo-server,.local,.cluster,ai-helper-svc,ai-pkgmanager-svc,ai-deployer-svc,ai-appmanager-svc,ai-trainer-svc,get" -
AKS
"<cluster-fqdn>,.<cluster-fqdn>,localhost,127.0.0.1,10.0.0.0/8,mcr.microsoft.com,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,.svc,.svc.cluster,.svc.cluster.local,.svc.cluster.local.,argocd-repo-server,istiod.istio-system.svc,logging-operator-logging-fluentd.logging.svc.cluster.local,argocd-repo-server,.local,.cluster,ai-helper-svc,ai-pkgmanager-svc,ai-deployer-svc,ai-appmanager-svc,ai-trainer-svc,get\"
"<cluster-fqdn>,.<cluster-fqdn>,localhost,127.0.0.1,10.0.0.0/8,mcr.microsoft.com,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,.svc,.svc.cluster,.svc.cluster.local,.svc.cluster.local.,argocd-repo-server,istiod.istio-system.svc,logging-operator-logging-fluentd.logging.svc.cluster.local,argocd-repo-server,.local,.cluster,ai-helper-svc,ai-pkgmanager-svc,ai-deployer-svc,ai-appmanager-svc,ai-trainer-svc,get\"
备注:
确保将
<cluster-fqdn>
替换为实际的 FQDN URL。
使用以下参数配置
input.json
文件:
必填参数 |
描述 |
---|---|
|
使用
true 或 false 启用或禁用代理设置。
|
|
用于路由来自集群的 HTTP 出站请求。这应该是代理服务器 FQDN 和端口。 |
|
用于路由来自集群的 HTTPS 出站请求。这应该是代理服务器 FQDN 和端口。 |
|
您不希望通过代理服务器路由的 CIDR 格式的主机、IP 地址或 IP 范围的逗号分隔列表。 这应与上面分别为 EKS 和 AKS 提供的列表相同。 |
代理配置的示例
input.json
:
"proxy": {
"enabled": true,
"http_proxy": "<http://<PROXY-SERVER-IP>:<PROXY-PORT>",>
"https_proxy": "<http://<PROXY-SERVER-IP>:<PROXY-PORT>",>
"no_proxy": <"paste list for eks/aks from above">
"proxy": {
"enabled": true,
"http_proxy": "<http://<PROXY-SERVER-IP>:<PROXY-PORT>",>
"https_proxy": "<http://<PROXY-SERVER-IP>:<PROXY-PORT>",>
"no_proxy": <"paste list for eks/aks from above">
.microsoft.com
login.microsoftonline.com
login.windows.net
graph.microsoft.com
sfbrprddeploywe.azurecr.io
sfbrprddeploywe.westeurope.data.azurecr.io
registry-data.uipath.com
registry.uipath.com
dc.services.visualstudio.com
activate.uipath.com
download.uipath.com
du-metering.uipath.com
du.uipath.com
du-au.uipath.com
du-ca.uipath.com
du-jp.uipath.com
du-us.uipath.com
du-sg.uipath.com
raw.githubusercontent.com
objects.githubusercontent.com
pkg-containers.githubusercontent.com
raw.github.com
api.github.com
api.nuget.org
pkgs.dev.azure.com
gallery.uipath.com
github.com
pypi.org
pypi.python.org
pythonhosted.org
files.pythonhosted.org
opensuse.org
copr.fedorainfracloud.org
download.copr.fedorainfracloud.org
ping.looker.com
rt.services.visualstudio.com
uipath.pkgs.visualstudio.com
.blob.core.windows.net
pkgs.dev.azure.com
events.launchdarkly.com
app.launchdarkly.com
in.applicationinsights.azure.com
.pkg.dev
production.cloudflare.docker.com
.googleapis.com
.microsoft.com
login.microsoftonline.com
login.windows.net
graph.microsoft.com
sfbrprddeploywe.azurecr.io
sfbrprddeploywe.westeurope.data.azurecr.io
registry-data.uipath.com
registry.uipath.com
dc.services.visualstudio.com
activate.uipath.com
download.uipath.com
du-metering.uipath.com
du.uipath.com
du-au.uipath.com
du-ca.uipath.com
du-jp.uipath.com
du-us.uipath.com
du-sg.uipath.com
raw.githubusercontent.com
objects.githubusercontent.com
pkg-containers.githubusercontent.com
raw.github.com
api.github.com
api.nuget.org
pkgs.dev.azure.com
gallery.uipath.com
github.com
pypi.org
pypi.python.org
pythonhosted.org
files.pythonhosted.org
opensuse.org
copr.fedorainfracloud.org
download.copr.fedorainfracloud.org
ping.looker.com
rt.services.visualstudio.com
uipath.pkgs.visualstudio.com
.blob.core.windows.net
pkgs.dev.azure.com
events.launchdarkly.com
app.launchdarkly.com
in.applicationinsights.azure.com
.pkg.dev
production.cloudflare.docker.com
.googleapis.com
Pod 无法在代理环境中与 FQDN 通信,并显示以下错误:
System.Net.Http.HttpRequestException: The proxy tunnel request to proxy 'http://<proxyFQDN>:8080/' failed with status code '404'.
System.Net.Http.HttpRequestException: The proxy tunnel request to proxy 'http://<proxyFQDN>:8080/' failed with status code '404'.
要解决此问题,您必须创建
ServiceEntry
,如以下示例所示:
apiVersion: networking.istio.io/v1beta1
kind: ServiceEntry
metadata:
name: proxy
namespace: uipath
spec:
hosts:
- <proxy-host>
addresses:
- <proxy-ip>/32
ports:
- number: <proxy-port>
name: tcp
protocol: TCP
location: MESH_EXTERNAL
apiVersion: networking.istio.io/v1beta1
kind: ServiceEntry
metadata:
name: proxy
namespace: uipath
spec:
hosts:
- <proxy-host>
addresses:
- <proxy-ip>/32
ports:
- number: <proxy-port>
name: tcp
protocol: TCP
location: MESH_EXTERNAL