[预览] AI Unit 消耗概述

概述

Based on the activity performed in Document Understanding^TM, IXP and AI Center, the dashboard offers a detailed view of the AI units consumption.

提示：

You can use Insights for free to view this dashboard. All you need to do is enable Insights.

备注：

Data is only available following the dashboard's release (July 2024), while the dashboard is still in public preview.

备注：

For more information on Insights data retention, check the Data retention policy section.

重要提示：

• 仪表板数据仅限于与组织位于同一区域的信息。
• 数据每 24 小时刷新一次。
• 仪表板包含 Communications Mining、Document Understanding 和 AI Center 的 AI Unit 消耗数据。
• The default tenant's name may be displayed as Unknown in the following scenarios:
  • 租户是在组织使用社区版计划时创建的，但随后转到了企业版计划。
  • 数据所属的区域与组织的区域不同。
  • 消耗数据与缺失的事务有关，例如没有作业 ID 的事务。

先决条件

To access the AI units consumption overview dashboard, Insights must be enabled on your tenant.

Make sure you are using these minimum versions or higher. If you are using a lower version, Unknown is displayed for fields which are not properly reported.

• UiPath Studio and Robot: 2023.6

• UiPath.DocumentUnderstanding.Activities package: 2.9.1

• UiPath.DocumentUnderstanding.ML.Activities package: 1.28.2

• UiPath.IntelligentOCR.Activities package: 6.19.1

• UiPath.MLServices.Activities: 2.0.2

  备注：

  基于版本低于 22.10 的开箱即用包的 AI Center ML 技能消耗的 AI Unit 不会显示在仪表板中。仅会显示基础设施消耗的 AI Unit。用于调用技能的 AI Unit 不会被追踪，因此不会显示在仪表板中。

  请注意，升级 ML 包版本也意味着要重新训练可重新训练的模型。

组织级消耗量

此仪表板概述了每个租户使用的 AI Unit 数量。

For more information on how to track the consumption at organization level, check the Monitoring license allocation page from the Automation Cloud™ Admin Guide.

指标

下表介绍了组织级 AI Unit 消耗仪表板指标：

指标	描述
组织级别消耗概述	从开始日期开始计算的消耗的 AI Unit 总数，并按租户拆分。
组织级 API 密钥消耗量	将 API 密钥作为认证方法的自动化操作产生的组织级 AI Unit 消耗。例如，当通过机器学习提取程序使用 AI Center 的技能、或使用智能关键字分类器/表单提取程序进行分类时，该数据具有实用价值。

[Preview] Tenant level consumption overview

此仪表板概述了特定于单个租户的 AI Unit 的使用模式。

备注：

• 仪表板数据仅限于与组织位于同一区域的信息。

• 数据每 24 小时刷新一次。

• The default tenant's name may be displayed as Unknown in the following scenarios:

  • 租户是在组织使用社区版计划时创建的，但随后转到了企业版计划。
  • 数据所属的区域与组织的区域不同。
  • 消耗数据与缺失的事务有关，例如没有作业 ID 的事务。

• If the value for Orchestrator folder is displayed as Unknown, it means that there is no related data. This could result from using an outdated Robot or activity package version, or if API Keys were used to access public endpoints, such as du.uipath.com/invoices.

• 仪表板显示来自租户的所有数据。

• 该仪表板包含Document Understanding 、IXP 和AI Center AI Unit 使用数据。

  对于 Document Understanding，数据涵盖跨平台和智能 OCR 活动，适用于传统项目和新式项目。 报告预训练的专用模型和生成模型以及自定义模型的数据。

• 仪表板显示来自以下其中一项的消耗数据：

  • 在租户级别分配的 AI Unit。
  • 在组织级别分配的 AI Unit。 这仅适用于租户未获得分配的 AI Unit，但消耗事件有关联租户的情况。 例如，仪表板上显示的租户使用的 AI Unit 数量将与组织级别仪表板上显示的数字匹配。

筛选条件

You can choose a specific time period to review AI units usage. The default period is set at 90 days.

指标

平铺	描述
按产品划分的消耗	按产品分组的已使用 AI Unit 总数： AI Center Document Understanding IXP (智能提取处理) GenAI Activities 语义活动（促销）
按 Orchestrator 文件夹划分的消耗	Total number of consumed AI units, distributed by the Orchestrator folder the automation is run in. Note: If the value is displayed as Unknown, it means that there is no related data. This could result from using an outdated Robot or activity package version, or if API Keys were used to access public endpoints, such as du.uipath.com/invoices. The value is displayed as Unknown also in the case of suspended jobs. In this case, the entry is populated after the job resumes and the automation execution finishes. If the value is displayed as N/A, this indicates that it's not applicable because the operation was carried out outside of an Orchestrator folder.
按 Orchestrator 文件夹和产品划分的消耗	已使用的 AI Unit 总数，按运行自动化的 Orchestrator 文件夹分发，以及使用这些 AI Unit 的产品。
按自动化划分的消耗	使用的 AI Unit 总数，按自动化名称分组： Automation name: Process name for RPA automations or AppId for API consumption. AI units: Total number of consumed AI units. Orchestrator folder name: Orchestrator folder from which the process was run. Consumer tenant name: Tenant from which the request for consumption was made. Consumer organization ID: Organization from which the request for consumption was made. Consumption pool: Consumption pool from which AI units were consumed (organization or tenant). Note: If the value is displayed as Unknown, this means that there is no data for it. One potential cause could be an older Robot or activity package version. If the value is displayed as N/A, this indicates that it's not applicable because the operation was carried out outside of an automation, Orchestrator folder.