uip tm execution

uip tm execution inspects and manipulates test executions — the objects produced by uip tm testset execute. Use these verbs to list executions for a test set, enumerate the test case logs of a finished run, and retry only the failed cases in place.

The command that starts an execution is uip tm testset execute, which returns an ExecutionId. Every verb on this page takes that ID (or derives it from context).

Synopsis

uip tm execution list --project-key <key> --test-set-id <uuid> [filters…]
uip tm execution list-testcaselogs --execution-id <uuid> --project-key <key> [filters…]
uip tm execution retry --execution-id <uuid> (--project-key <key> | --test-set-key <key>) [--execution-type <type>]

All verbs honor the global options and the standard exit codes. Every verb accepts -t, --tenant <name> and --log-level <level> (default Information).

uip tm execution list

List the executions associated with a test set. Filters are applied server-side; the CLI returns one page per call, sized by --top / --skip.

Arguments: none.

Options:

• --project-key <key> (required) — owning project.
• --test-set-id <uuid> (required) — test set UUID (the Id field from testset list, not TestSetKey).
• --filter <text> — search executions by name.
• --status <status> — filter by execution status. Accepted values come from the SDK TestExecutionStatus enum.
• --execution-type <type> — filter by execution type. Accepted values come from the SDK ExecutionType enum (automated, manual, mixed, none).
• --execution-finished-interval <interval> — filter by how recently the execution finished. Accepted values come from the SDK TestExecutionFinishedInterval enum.
• --top <number> — page size. Defaults to 50.
• --skip <number> — results to skip. Defaults to 0.

Nota:

The exact enum values accepted by --status, --execution-type, and --execution-finished-interval are generated from the Test Manager SDK at runtime. Run uip tm execution list --help to see the current set for your installed tool version.

Ejemplo:

uip tm execution list \
  --project-key DEMO \
  --test-set-id a1b2c3d4-0000-0000-0000-000000000001 \
  --top 2

Data shape:

{
  "Code": "ExecutionsList",
  "Data": [
    {
      "Id": "b2c3d4e5-0000-0000-0000-000000000001",
      "Name": "Nightly Run 2025-04-15",
      "Status": "Passed"
    },
    {
      "Id": "b2c3d4e5-0000-0000-0000-000000000002",
      "Name": "Nightly Run 2025-04-14",
      "Status": "Failed"
    }
  ]
}

uip tm execution list-testcaselogs

List the test case logs produced by a single execution. Each log is one run of one test case, carrying result, status, and timing.

Arguments: none.

Options:

• --execution-id <uuid> (required) — execution to inspect.
• --project-key <key> (required) — owning project.
• --only-failed — shortcut for "show only failed logs".
• --filter <text> — search logs by name.
• --results <results...> — space-separated results to include. Accepted values come from the SDK Result enum.
• --statuses <statuses...> — space-separated execution statuses. Accepted values come from the SDK TestCaseLogExecutionStatus enum.
• --duration-period <period> — filter by duration bucket. Accepted values come from the SDK DurationPeriod enum.
• --top <number> — page size. Defaults to 50.
• --skip <number> — results to skip. Defaults to 0.

Ejemplo:

uip tm execution list-testcaselogs \
  --execution-id a1b2c3d4-0000-0000-0000-000000000001 \
  --project-key DEMO \
  --only-failed

Data shape:

{
  "Code": "ExecutionTestCaseLogs",
  "Data": [
    {
      "Id": "c3d4e5f6-0000-0000-0000-000000000001",
      "TestCaseName": "Login flow",
      "Status": "Finished",
      "Result": "Failed"
    }
  ]
}

Each Id in the output is a test case log UUID. Feed it to uip tm testcaselog list-assertions to see why a test case log was marked Failed.

uip tm execution retry

Retry only the failed test cases of a completed execution, in place. The command:

1. Fetches the execution's stats and refuses to proceed unless the run is in a terminal state (otherwise it exits 1 with a guidance message).
2. If there are zero failed cases, prints a Message envelope and exits 0 — this is intentionally not an error.
3. Otherwise collects every failed test case log ID (paged) and kicks off a retry that targets only those logs.

The retry reuses the same execution ID; it does not create a new one.

Arguments: none.

Options:

• --execution-id <uuid> (required) — execution to retry.
• --project-key <key> — owning project. Either this or --test-set-key is required.
• --test-set-key <key> — test set key (e.g. DEMO:42); the project key is derived from the prefix.
• --execution-type <type> — execution type for the retry: automated (default), manual, mixed, or none.

Ejemplo:

uip tm execution retry \
  --execution-id a1b2c3d4-0000-0000-0000-000000000001 \
  --project-key DEMO

Data shape — when there are failures to retry:

{
  "Code": "ExecutionRetry",
  "Data": {
    "ExecutionId": "a1b2c3d4-0000-0000-0000-000000000001",
    "Status": "Running",
    "StartTime": "2025-04-15T10:30:00Z",
    "RetriedCount": 3
  }
}

When there are no failures to retry:

{
  "Code": "ExecutionRetry",
  "Data": {
    "Message": "Execution 'a1b2c3d4-0000-0000-0000-000000000001' has no failed test cases to retry."
  }
}

Códigos de salida

All uip tm execution … verbs follow the standard exit codes — 0 on success (even when retry finds nothing to retry), 1 on generic failure, 2 on authentication failure, 3 on validation error.

The Test Manager run lifecycle adds one behavior worth calling out explicitly, and it lives on wait, not on the execution verbs themselves:

Distinguishing "timed out" from "finished with failures"

There is no single tm verb that exits non-zero because tests failed. The standard CI pattern is a three-step pipeline:

1. Launch — uip tm testset execute returns an ExecutionId and exits 0 as soon as the run is queued.
2. Block — uip tm wait --execution-id <id> --timeout <seconds> polls until the execution reaches a terminal state.
   • Exits 0 when the execution finished (regardless of pass/fail — "finished" is the success signal here).
   • Exits 2 on --timeout expiry. This is domain-specific: the shared contract reserves 2 for AuthenticationError, but wait reuses it for TimeoutError so scripts can branch on "took too long" without parsing text. See the note on this under uip tm wait exit codes.
   • Exits 1 on API failure, interrupt, or abort.
3. Verdict — uip tm report get --execution-id <id> reads Passed / Failed / Skipped / PassRate. Your script decides what a pass looks like and fails the build explicitly (e.g. exit 1 when Failed > 0). report get itself exits 0 whenever it successfully produces the summary, regardless of the outcome of the run it is summarizing.

# Start the run
id=$(uip tm testset execute --test-set-key DEMO:10 --output-filter .Data.ExecutionId)

# Block with a timeout; branch on the outcome
if ! uip tm wait --execution-id "$id" --timeout 1800; then
  code=$?
  if [ "$code" -eq 2 ]; then
    echo "timed out" >&2
    exit 2
  fi
  echo "wait failed ($code)" >&2
  exit "$code"
fi

# Decide pass/fail from the summary
failed=$(uip tm report get --execution-id "$id" --project-key DEMO --output-filter .Data.Failed)
if [ "$failed" -gt 0 ]; then
  echo "$failed test case(s) failed" >&2
  exit 1
fi
echo "all passed"

Related

• testset execute — start an execution.
• wait — block until an execution reaches a terminal state.
• report, result, attachment — post-run artifacts.
• testcase — testcaselog list-assertions turns a failed log into per-assertion detail.

Ver también

• Test Manager overview
• Exit codes — shared contract.
• Scripting patterns — the three-step launch-wait-verify pipeline in detail.