# Managing VPN settings

> VPN settings and configuration options for Cloud Robot - Serverless machine templates, including editing and disconnecting VPN.

You can edit the VPN setup for a Cloud Robot - Serverless template at any time, or disconnect the template from VPN.

## Disconnecting a template from VPN

1. Go to **Tenant > Machines**.
2. At the right of the serverless machine template row, Select **More Actions**![docs image](https://dev-assets.cms.uipath.com/assets/images/orchestrator/orchestrator-docs-image-More_VT-16d3389a-960a3e20.png) and select **Edit Machine**.

The **Edit Machine** page opens on the **Machine** step.

3. Along the top, on the right, Select the **Network Configuration** step.
4. Select **Enable VPN integration** to switch off the toggle.
:::important
If a machine needed to access resources inside your company network to execute a job, that job will fail.
:::
5. Select **Update** in the bottom right to apply your changes.

## Changing the address space

To change the address space used for a template, you must first disconnect the template from VPN, and then edit it to change the address space.

1. Go to **Tenant > Machines**.
2. At the right of the serverless machine template row, Select **More Actions**![docs image](https://dev-assets.cms.uipath.com/assets/images/orchestrator/orchestrator-docs-image-More_VT-16d3389a-960a3e20.png) and select **Edit Machine**.

The **Edit Machine** page opens on the **Machine** step.

3. Along the top, on the right, Select the **Network Configuration** step.
4. Switch off the **Enable VPN integration** toggle.
5. Select **Update** in the bottom right.

Allow a few minutes to disconnect from VPN.

6. At the right of the serverless machine template row, Select **More Actions**![docs image](https://dev-assets.cms.uipath.com/assets/images/orchestrator/orchestrator-docs-image-More_VT-16d3389a-960a3e20.png) and select **Edit Machine**.
7. Along the top, on the right, Select the **Network Configuration** step.

If **Disconnecting** is displayed under the **Address space** field, remain on this page, but allow a few more minutes to finish disconnecting from VPN.

8. Switch on the **Enable VPN Integration** toggle.
9. Edit the **Address space** field as needed.
10. Select **Update** in the bottom right to apply your changes.

After you apply the change, serverless robots for this template attempt to reconnect to VPN according to the new settings.